OVA marine 50khz 1.2 kW fish finder echo sounder boat transducer

1.Product Introduction of the boat transducer

This best performing 1.2 kW boat transducer, this mount performs well in deep water and has exceptional bottom and water column detail.

We are the professional fish finder transducer manufacturer in China.

2.Product Parameter(Specification)of the boat transducer

A). Cable: 15m.

B). Frequence: 50kHz

C). Material: Rubber

D). Connector: Pin3(Support customization) 
E). Compatible: Furuno, Garmin, Hondex, Koden, Raymarine, Lowrance, Samyung etc.

3.Product Feature of the boat transducer

4.Client Feedback of the boat transducer

5.Mounting Options of the boat transducer

Selecting the mounting location

Although it falls outside the scope of this guide to describe all of the details of installation, there are some important points that are true for every transducer installation. Acoustic noise is always present, and these sound waves can interfere with your transducers operation. Ambient (background) noise from sources such as waves, fish and other vessels cannot be controlled. However, carefully selecting your transducers mounting location can minimize the effect of vessel-generated noise from the propeller(s) and shaft(s), other machinery, and other fish finders. The lower the noise level, the higher the gain setting you'll be able to use effectively on your fish finder.

Always select a location where:

• Water flowing across the hull is smoothest with a minimum of turbulence and bubbles

• The transducer will be continuously immersed in water (not applicable for In-Hull models)

• There is a minimum of deadrise angle

• The transducer beam will not be obstructed by the keel or propeller shaft(s)

• There is adequate headroom inside the vessel for the height of the housing, tightening the nuts, and

removing the valve assembly and insert

As a rule, no transducer should be located near a water intake or discharge opening, directly aft of any lift- ing strakes, steps or other obstructions or irregularities in the hull , or behind eroding paint (an indication of turbulence). The flow of water across the transducer face must be as smooth as possible in order to get the best performance while cruising.

6.FAQ

Q: My transducer needs to be cleaned frequently. Is there any type of paint I can use to prevent barnacles, algae and marine growth from fouling it?

A: There are several manufacturers of anti-fouling marine paint. These paints are available from ma- rine supply stores. 

Hot Tags: boat transducer, manufacturers, suppliers, wholesale, custom, buy, best, price, on sale, for sale